Localino v3.0 Kit 3D

Prices are only visible after login..
  • L10010
Localino 3.0 Kit (4 Anchor + 2 Personal Tag) - Unpack. Configure. Localize in 3D.... more
Product information "Localino v3.0 Kit 3D"

Localino 3.0 Kit (4 Anchor + 2 Personal Tag) - Unpack. Configure. Localize in 3D.

Includes Hardware and Software license. No additional fees.



Localino measures ranges precisely and estimates 2D/3D positions with an accuracy of <30cm. It is suitable for indoor or outdoor applications.

High accuracy and scalability
Localino offers centimeter accuracy and long range. The system is highly scalable without the need of master nodes or a synchronization network. Each node can be configured separately.

Integration into your Wifi network
Localino integrates into your WiFi network. It measures the ranges to a mobile tag and broadcasts the measured data into the Wifi network. The Localino application captures the data, processes, displays and saves the estimated positions. It is also possible to broadcast a location datastream into the network, for example to display locations at remote devices or to integrate the locations into higher level applications.

Your data is your data
Localino operates completely offline. All processing is done in a single application. Your data is never transmitted to any cloud or internet service. All processing and data are kept offline.

Long life
Localino Tags are designed for long life. The internal rechargeable battery lasts up to 100 days when using a location update rate of 0.1 Hz. Even increasing the location update rate to 1 Hz the battery lasts several days (depending on selected channel). Localino tags use standard rechargeable batteries that can be replaced.


Localino v3.0 Kit Content

  • 4x Localino v3.0 Anchor (with 4 Anchors your can improve positioning accuracy or extend the system coverage or start 3D positioning compared when using 3 Anchors only)
  • 1x Localino Suite Software (Backend+Frontend) License to locate up to 2 Tags (to locate additional Tags please see "Tag Licenses".)
  • 2x Localino v3.0 rechargeable Tags
  • 1x Configuration adapter cable (USB Y-type)
  • Description

The kit must be setup according to the supplied description.



  • existing 2.4 GHz Wifi network or accesspoint / router
  • 4x Micro USB Charger 5V DC (standard USB mobile phone charger)
  • micro USB cable for Tag configuration if configuration is required (standard micro USB cable as used for most mobile phones)

 Technical Specification

Operational range 20-50m depending on configuration
Range Accuracy < 10cm in LOS
2D / 3D accuracy < 30cm
2D / 3D update rate

<0.0001 Hz - 30 Hz depending on configuration

Anchor 5V DC (micro USB)

battery powered, recharable with 5V DC (micro USB)

Tag battery lifetime up to 10 days in high density mode in 1 Hz update rate, up to 100 days in 0.1 Hz update rate - depends also on selected channel and output power
 Anchor  83x52x14 mm, weight 36g

 55x46x17 mm, weight 23g incl battery


 The figure below shows the histogram of the ranging accuracy in high speed mode for ranges from 2m to 10m in 50cm steps. At each step 255 samples have been recorded. It can be seen that the ranging accuracy the system is  <10cm.



The plots below show accuracy measurements that were recorded with 4 Anchors localizing multiple Tags. Each red dot in the plots below represents a single localization. When using 3 Anchors the accuracy will be a bit less. Using more than 4 Anchors the accuracy will improve even further.


Zoom to a single Tag position



please note: The mounting fixture on the pictures is not part of this product. The mounting fixture can be ordered seperately.

Related links to "Localino v3.0 Kit 3D"